resistance to impact

The article describes The basicity of slag, the alumina, fluorite and magnesia content in slag, the hydration resistance additives and CaO content in MgO-CaO materials are the factors which have impact to slag resistance of MgO-CaO materials.

本文综述了炉渣碱度，炉渣中氧化铝、氟化钙、氧化镁含量，镁钙材料中氧化钙含量与抗水化添加剂对镁钙材料抗渣性的影响。

The model was used to analyze the time dependent variation of frost thickness under different temperatures and relative wetness values as well as the impact of frosting on airside heat exchanger heat transfer and resistance.

利用该模型分析了不同温度和相对湿度下霜的厚度随时间的变化及结霜对空气侧换热器传热与阻力的影响。

Good resistance to impact and fire retardant performance, can with mini-battery.

良好的抗冲击,阻燃性能, 同时可配上矿灯,微型电瓶作业.

To obtain the resistance curve of crack growth of an elastic-plastic material, a test for dynamic crack initiation and arrestment is carried out on a self-designed bar-bar tensile impact apparatus by using larger diameter short specimens with deep circumferential notches and larger ligament diameters.

为得到弹塑性材料裂纹扩展的阻力曲线，采用较大外径和较大韧带直径的周边切口在自行研制的间接杆杆型冲击拉伸试验装置上进行了动态断裂和起裂止裂试验。

Superior abrasion-resistance, Dust-proof : Impact resistance, Very easy to construct, and maintain.

具有很高的耐磨性,减少灰尘, 耐冲击, 施工方便.

But, they do have several obvious advantages over the other fiber performs such as woven and braided fabric reinforced composites, including mass productivity, low fabrication cost, superior resistance to impact, and high ability to conform to complicated contours.

但是，相对于编织物和机织物等一些其他类型的增强复合材料，经编针织复合材料的优势也非常明显，如生产率高，成本低，耐冲击，适应复杂形状的能力等。

A study on the a-N curve and the resistance to repeated impact in the repeated impact test

多冲方法中的A&N曲线和多冲抗力研究

High mechanical strength, resistance to press, impact resistance to abrasion.

机械强度高 、 耐重压 、 耐冲击、耐磨耗.

EP/ PU function graded coatings not only had the strong adhesive power like EP, but also had the excellent corrosion resistant property like PU: the adhesive power achieved the first level, and resistance to impact 65kg · cm, and coefficient of attrition rate 0.042.

环氧/聚氨酯梯度涂层兼有环氧树脂与基体结合紧密的优点和聚氨酯良好的耐冲蚀磨损性能：附着力达到了1级；耐冲击性达到65kg·cm、磨损率为0.042。

Engineering ceramics feature resistance to high temperature, corrosion, wear and hot impact.

工程陶瓷材料具有耐高温 、 耐腐蚀 、 抗磨损及抗热冲击等优点.

The hardening of computer commonly includes the reinforce of electromagnetic compatibility, resistance to vibration; resistance to impact, tri-proof ( antiseptic, mild proof and resistance to the salt fog, etc).

计算机加固通常包括电磁兼容性加固、抗振动冲击性加固、高低温性加固、三防（防腐、防霉、抗盐雾）加固等。